dmesg - Intel Core 2 Duo E8600
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-15-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
BIOS-e820: [mem 0x00000000cff90000-0x00000000cff9dfff] ACPI data
BIOS-e820: [mem 0x00000000cff9e000-0x00000000cffcffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffd0000-0x00000000cffddfff] reserved
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P5KPL-AM EPU, BIOS 0501 08/20/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3328MB, range: 256MB, type UC
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4608MB, range: 256MB, type WB
total RAM covered: 4096M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 512MB, type WB
reg 4, base: 4608MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff8ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff8ffff] page 4k
RAMDISK: [mem 0x35eae000-0x36f4efff]
ACPI: RSDP 00000000000fb7f0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cff90000 0003C (v01 A_M_I_ OEMRSDT 08001020 MSFT 00000097)
ACPI: FACP 00000000cff90200 00084 (v02 A_M_I_ OEMFACP 08001020 MSFT 00000097)
ACPI: DSDT 00000000cff905c0 08A54 (v01 A1350 A1350000 00000000 INTL 20060113)
ACPI: FACS 00000000cff9e000 00040
ACPI: APIC 00000000cff90390 0006C (v01 A_M_I_ OEMAPIC 08001020 MSFT 00000097)
ACPI: MCFG 00000000cff90400 0003C (v01 A_M_I_ OEMMCFG 08001020 MSFT 00000097)
ACPI: OEMB 00000000cff9e040 00080 (v01 A_M_I_ AMI_OEM 08001020 MSFT 00000097)
ACPI: HPET 00000000cff99020 00038 (v01 A_M_I_ OEMHPET 08001020 MSFT 00000097)
ACPI: GSCI 00000000cff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001020 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcff8ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048366
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13247 pages used for memmap
DMA32 zone: 847760 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
PM: Registered nosave memory: [mem 0xcff9e000-0xcffcffff]
PM: Registered nosave memory: [mem 0xcffd0000-0xcffddfff]
PM: Registered nosave memory: [mem 0xcffde000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031962
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4027796K/4193464K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 165668K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3816.249 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7632.49 BogoMIPS (lpj=15264996)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27844 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
smpboot: Booting Node 0, Processors #1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (15264.99 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffcffff] (204800 bytes)
regulator-dummy: no parameters
RTC time: 15:24:29, date: 01/26/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000cffa00f0 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00190 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 00000000cffa0280 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfcffc000-0xfcffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xc480-0xc49f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xc800-0xc81f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfcffbc00-0xfcffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xc400-0xc407]
pci 0000:00:1f.2: reg 0x14: [io 0xc080-0xc083]
pci 0000:00:1f.2: reg 0x18: [io 0xc000-0xc007]
pci 0000:00:1f.2: reg 0x1c: [io 0xbc00-0xbc03]
pci 0000:00:1f.2: reg 0x20: [io 0xb880-0xb88f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea7ffff pref]
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [dma 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] could not be reserved
system 00:07: [io 0x0480-0x04bf] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd01fffff]
pci_bus 0000:03: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17028K (ffff880035eae000 - ffff880036f4f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbf90000-0xcff90000] (64MB) mapped at [ffff8800cbf90000-ffff8800cff8ffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1390749869.312:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7900
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 23
ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 23
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfcffbc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9da89dd2daeca3a3cb171fe18502208f132adef8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:886:437
rtc_cmos 00:02: setting system clock to 2014-01-26 15:24:30 UTC (1390749870)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata3.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: ATAPI: Optiarc DVD RW AD-7240S, 1.01, max UDMA/100
ata3.00: failed to get Identify Device Data, Emask 0x1
ata3.01: ATA-8: WDC WD5000AAKS-00M9A0, 05.01D05, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: failed to get Identify Device Data, Emask 0x1
ata3.00: configured for UDMA/133
ata4.01: HPA detected: current 625140335, native 625142448
ata4.01: ATA-8: WDC WD3200AAKS-00YGA0, 12.01C02, max UDMA/133
ata4.01: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
ata3.01: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sdb: sdb1 sdb2
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] Attached SCSI disk
ata4.01: configured for UDMA/133
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:1:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
sd 3:0:1:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:1:0: Attached scsi generic sg3 type 0
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 3:0:1:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[113]: starting version 204
usb 2-2: new low-speed USB device number 2 using uhci_hcd
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 2-2: New USB device found, idVendor=04f3, idProduct=0216
usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-2: Product: USB Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
hid-generic 0003:04F3:0216.0001: input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:1d.0-2/input0
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3815.999 MHz
Adding 4190204k swap on /dev/sda5. Priority:-1 extents:1 across:4190204k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[281]: starting version 204
lp: driver loaded but no devices found
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[drm] Initialized drm 1.1.0 20060810
intel_rng: FWH not detected
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x20/0x0
inputs:
Rear Mic=0x1a
Front Mic=0x1e
Line=0x1b
CD=0x1f
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPS0 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
lp0: using parport0 (interrupt-driven).
nvidia: module verification failed: signature and/or required key missing - tainting kernel
hda-intel 0000:01:00.1: Enable delay in RIRB handling
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
type=1400 audit(1390749872.253:2): apparmor="STATUS" operation="profile_load" parent=358 profile="unconfined" name="/sbin/dhclient" pid=373 comm="apparmor_parser"
type=1400 audit(1390749872.253:3): apparmor="STATUS" operation="profile_load" parent=358 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser"
type=1400 audit(1390749872.253:4): apparmor="STATUS" operation="profile_load" parent=358 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
type=1400 audit(1390749872.253:5): apparmor="STATUS" operation="profile_replace" parent=358 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser"
type=1400 audit(1390749872.253:6): apparmor="STATUS" operation="profile_replace" parent=358 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
type=1400 audit(1390749872.253:7): apparmor="STATUS" operation="profile_replace" parent=358 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Switched to clocksource tsc
ppdev: user-space parallel port driver
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: udev-fallback-graphics main process (649) terminated with status 1
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
init: failsafe main process (731) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (871) terminated with status 1
type=1400 audit(1390749873.286:8): apparmor="STATUS" operation="profile_load" parent=902 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=908 comm="apparmor_parser"
type=1400 audit(1390749873.286:9): apparmor="STATUS" operation="profile_load" parent=902 profile="unconfined" name="chromium_browser" pid=908 comm="apparmor_parser"
type=1400 audit(1390749873.286:10): apparmor="STATUS" operation="profile_replace" parent=902 profile="unconfined" name="chromium_browser" pid=908 comm="apparmor_parser"
ATL1E 0000:02:00.0 eth4: NIC Link is Up
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24174 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24175 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24176 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24177 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24178 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24179 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24180 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24181 PROTO=2
nvidia 0000:01:00.0: irq 44 for MSI/MSI-X
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x276 offMax=0x20da
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.6 (interface 0x001a0007).
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24182 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24183 PROTO=2
vboxpci: IOMMU not found (not registered)
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24238 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24251 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24271 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24273 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24291 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24292 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24305 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24323 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24324 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24401 PROTO=2
audit_printk_skb: 156 callbacks suppressed
type=1400 audit(1390751191.855:63): apparmor="STATUS" operation="profile_replace" parent=5073 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5077 comm="apparmor_parser"
type=1400 audit(1390751191.855:64): apparmor="STATUS" operation="profile_replace" parent=5073 profile="unconfined" name="/usr/sbin/cupsd" pid=5077 comm="apparmor_parser"
type=1400 audit(1390751191.855:65): apparmor="STATUS" operation="profile_replace" parent=5073 profile="unconfined" name="/usr/sbin/cupsd" pid=5077 comm="apparmor_parser"
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24414 PROTO=2
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24432 PROTO=2
conftest[21727]: segfault at 0 ip 00000000004005c0 sp 00007fff72718f50 error 4 in conftest[400000+1000]
conftest[21756]: segfault at 0 ip 00007f31f29dfbc6 sp 00007fff100e9b18 error 4 in libc-2.17.so[7f31f289b000+1bd000]
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24433 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24434 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24452 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24465 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24483 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24484 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24485 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24503 PROTO=2
[UFW BLOCK] IN=eth4 OUT= MAC=01:00:5e:00:00:01:00:02:cf:e6:13:22:08:00 SRC=10.0.0.138 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=24516 PROTO=2